Briture Co., Ltd.  

Product Name: Water based Solid Acrylic Resin Model NO.: BAW-563 Color: Faint Yellow Molecular Principal Chain: Element Organic Polymer Trademark: Briture Transport Package: 25kgs Net Per Bag Specification: 99%min Origin: Hefei HS Code: 3906909000 Product Description Water-base Solid Acrylic Resin BAW-563(Similar to Joncryl 678)Features &Benefits:General purpose mid-range molecular weight Acrylic ResinHigh Gloss and HoldoutPromotes ResolubilityFine ClaritySpecification:Appearance-----------------------------------------------Clear Flakes or granularNon-Volatile (%)-----------------------------------------98.7Density (g/cm3, 25ºC)------------------------------------1.16Tg (ºC)------------------------------------------------------85Acid Number---------------------------------------------215Molecular Weight----------------------------------------8,500Softening Point, Ring &Ball (ºC)---------------------165Total VOC (wt. %)---------------------------------------1.3Application:Water based Printing InkPacking: 25kgs /bagStore:Should be stored in dry, aeration area, avoiding the wet. The valid store period is two years.Dissolution methodof water based solid acrylic resin(suggestion)Under reactormaterialBAW-563/567(permillage)Remark1purified water621.502Solid resin300According to user`s request3defoamer4ammonium water(25%)78.005MEA(monoethanolamine)(78.00)5,6,7 can be adjust as per request to instead of ammonium water.6DMEA(78.00)7AMP-95organic ammoniates(78.00)8Alcohols(enthanol or isopropanol)Adjust the liquid resin dry speed9defoamer0.50Add when you needTotal100Profess flows:1. First put quantitate water into dispersal cylinder, and open disperser 600RPM/min.2. Put solid acrylic resin, 1200RPM/min.3. Addammonia(25%)solutionslowly in batch (suggest add in three time 40%, 40%, 20%, time interval control in 20 minutes). 4.Stir until completely dissolved solid resin(about4-4.5h)5. After stirring dissolved, half speed can reduced to 1000r/min.6.Keep the PH 8.5-9.2(If the PH need to put ammonia, and still adjust PH to 8.5-9.2).Recommended formulation 1Wearproof varnishNon-film-forming (hard) emulsion (BAW-91R) :35%Middle-molecular solid resin solution(BAW-563) (30%): 25%Film-forming (soft) emulsion (BAW-48R): 25%Defoamer :0.1~0.2%Wax emulsion: 6~8%Coalescing agent : 0.5~1%Slip agent : 0.5~1%Alcohol: appropriateWater : marginHigh gloss varnishNon-film-forming (hard) emulsion (BAW-91R): 35%Middle-molecular solid resin solution(BAW-563) (30%): 25%Low molecular solid resin solution (BAW-564) (50%): 15%Defoamer: 0.1~0.2%Wax emulsion: 3~5%Coalescing agent: 0.5~1%Slip agent: 0.2~0.8%Alcohol: appropriateWater: marginOverprint varnish recommended formulation 2( for high gloss and waterproof)BAW-563 solution (BAW-70R): 24%BAW-90R :33%BAW-50R: 20%BAW-48R :13%Flatting agent : 1%defoamer:0.2%Wax emulsion: 6%water: 3%Noted: If you want high gloss, you can use less water. The above formulation just our suggestion.Contact information:Emma WangTel: +86-551-63522028Mobile/ 86-18855132322Website: www.briturechem.com